Edge Honing Guide A-60
(For Use with an oil stone)
tool for Honing the plane irons of different model of the
carpenters irons bench plates such as jack Planes, Block
Planes, Plough Planes,Spokeshaves,Chesils & the mortise of
the width ranging from 3mm to 65mm.
The Plane irons & other cutting tools
are gripped from both the sides between the two simultaneously
moveable and reversible jaws of the guide and tightened on the
top by the knurled screw clamp to strongly hold the tool in
its position while honing.
The knurled screw clamp can be use in two
positions (forward & backward) provided in the guide.
The simultaneously moveable (outward &
inward ) jaws of the guide are operated by rotating (clockwise
& anti clockwise) The knurled screw head of the left &
right hand thread screw ,underneath the guide.
The honing guide is free moveable on the
steel rollers made of good quality steel.
The correct honing angle is 30 degree
& the sharpening angle is 25 degree of the cutting tool is
achieved by shifting the roller at the rear end of the guide
of its respective position of 30 degree & 25 degree marked
on the guide.